Segmented Ball valve is a ball sector valve with metal to metal or metal to PTFE seating. The segmented ball valve combines the best control characteristic of the ball valve and the butterfly valve. It can be used both as a control valve and as a shut off valve. It is available as standard in Stainless steel. It is also available in other materials based on the application.
A one piece, leak proof stainless steel body, with face to face lengths in acc. with IEC standards
A ball sector with top and bottom bearings for low operating torque so that low torque actuators can be used
A 'V' shaped sector that provides accurate control over a wide range, even at low flow rates and if used for viscous media with high concentrations of solid particles.
A spherical area of the ball sector which, with PTFE seat gives tight closing. The stellite seat ring ensures excellent tightness at all differential pressures. The maximum leakage in the direction of flow is less than-6 x 10 of the Kv value in this case.
Metaloplast bearings
O ring or graphite packing for the stem gland
The standard stellite seat can easily be converted to PTFE after turning the ball sector by 180 degrees, without the need to dismantle the valve.
Are designed to over come the problems of harsh, particle entrained processes.
Application
Segmented Ball valve can be used both as a control valve and as a shut off valve in a wide variety of applications and in different operating modes. The valve represents a concrete result of our product philosophy which is focused on functionality, high quality and low life cycle costs and is based on concentrating our range to a limited number for valve types, but all of them suitable for a wide variety of applications. One of the most successful area for this valves is Paper Industries where they are used in dilusion line.
Segmented Ball valve addresses and solves many long standing challenges faced by traditional ball valves such as
Piping forces that unevenly load the seal
Low range ability due to limited orifice characterization
Unsatisfactory shutoff capabilities
Achieves Class IV shut off with a metal seal and Class VI with the special soft seal.
The excellent control characteristics of segmented Ball valve are particularly beneficial under severe control conditions, in difficult media and under demanding pressure conditions in the process industry such as
if the media contains solid particles
if a wide control range is required
if control applications involving high pressure drops
S. No. 40/4, Balaji Udyam Nagar,
Tempo Chowk, Wadgoan Sheri,
Pune - 411014, Maharashtra, India
Phone:91-20-65333549/65311091/27031161
Fax:91-20-27031161.
Contact Details
SDTORK CONTROLS PVT. LTD. GST :
1106, 10th Main Road, RPC Layout, Vijayanagar, RPC LAYOPUT BUS STAND, Bengaluru - 560104, Karnataka, India
Key Personnel
Mr. Sunil Kurkute
(Director)
Mr. D. R. Shetty
(Director)
RFQ Request For Quotation
Get Quotes For Your Buying Requirement. Tell Suppliers What You Need.